Nylon Type 6/6, Polyamide- is a standard all-purpose extruded grade of Nylon rod. Nylon Type 6/6, of all the unmodified nylons, is the strongest, most rigid nylon, and has one of the highest melting points. It is commonly specified for screw machined electrical insulators and food contact parts. The toughness of Nylon along with its low coefficient of friction and good abrasion resistance make it an ideal replacement for a wide variety of materials from metal to rubber. Nylon is easily fabricated and machined into precision parts using standard metalworking equipment. Nylon Type 6/6 is FDA, USDA, NSF, and 3A-Dairy compliant. Nylon products are available in both Natural (off-white color) and black, however custom colors are available on a custom basis (please contact us for minimum purchases).

Other attributes of Nylon products include:

• Good mechanical and electrical properties
• High strength, stiffness and toughness
• Easy to machine
• Many grade options available
• Can be cast as finished parts and near net shapes (Contact Modern Plastics)

Engineering specifications for Nylon Type 6/6 Rod are:

• Tensile Strength – 11,500 psi
• Compressive Strength – 12,500 psi
• Water Absorption (saturation) – 0.30%
• Continuous Service Temperature - 210° deg. F
• Resistant to Hydrocarbons, Ketones, Ethers, Ketones, Chlorinated solvents & Alcohols (limited service)
• Flammability rating UL94:V-2

Engineering Notes:

Nylons can absorb up to 7% (by weight) water under high humidity or submerged in water. This can result in dimensional changes up to 2% and a corresponding reduction of physical properties. Proper design techniques can frequently compensate for this factor.